There are a few different ways in which to fool fingerprint security system. This one will more than likely work with a few scanners, however, not every scanner is the same. With this method, you will be creating a fake fingerprint of the person that owns the security system you wish to break into such as a computer, mobile phone, etc… The problem is you must have access to their fingerprint, a digital camera, super glue, wood glue, a bottle cap, and glue that will not harm your skin.
- Once you have found the fingerprint you need, you pour a small amount of super glue into the bottle cap and hold the cap tight against the fingerprint. The vapours from the glue react to the grease found in the fingerprint, which will cause the fingerprint to appear.
- Take a photo with the digital camera. Be sure that all points on the fingerprint are clearly seen in the photo.
- Next, you will need a laser printer and a foil slide. Print the fingerprint onto the foil slide. The laser printer will create a 3D print that is easily copied. All you do now is to apply a small amount of wood glue over the fingerprint and let it dry completely.
- Once the glue is dry, cut out the fingerprint with the wood glue and slowly remove the glue from the foil slide. This can be very tricky. You do not want to tear the fingerprint or you will have to start over with the wood glue again.
- Your new fingerprint is ready to use. Using a glue that is safe for your skin, apply the fingerprint. Test it out!
In most cases, in older security systems this will work, however, not all scanners use the same exact finger points to get a reading.
Related Posts:
